At present, there are many kinds of adhesives on the market, mainly divided into two kinds, one is two-component, such as epoxy resin, etc.; the other is one-component, such as CCl3. Generally speaking, two-component adhesives are bonded by curing reaction, while single-component adhesives are bonded by the volatilization of a solvent. So what are the bonding methods for acrylic candy boxes? Let me introduce you to the editor below.
　　1, butt
　　 Place two acrylic boards that need to be butted on the platform horizontally, close them, and stick tape on the bottom, leaving a gap less than 0.3mm wide for the application of adhesive. Use a syringe to inject the adhesive uniformly and slowly from the gap until it is completely filled. After it is completely cured, the tape can be removed.
　　2, plane bonding
　　 plane bonding is a special bonding method. First wipe the side of the acrylic that needs to be pasted, and place it horizontally, and pour the adhesive on it. Place another side of the acrylic board diagonally on top of the acrylic board coated with adhesive, put it down evenly and slowly, and then drive out the bubbles to complete the bonding.
　　Acrylic adhesive can erode the surface of the acrylic sheet and leave traces that are not easy to eliminate. Therefore, you can use a sticker to protect the parts that do not need to be bonded.
　　 The above is about the bonding method of acrylic candy box, I hope it can help everyone.