First of all, although acrylic has good transparency and mechanical strength better than ordinary glass, it is easy to scratch and stains. Therefore, we recommend that the kitchen and dining table are easy to contact with stains. Acrylic products are not suitable for use because they are contaminated with oil stains. Need to use chemical detergent, this will have a slight chemical reaction with the resin in the acrylic, one or two times may not be obvious changes, but the number of times will be greatly changed from gloss, transparency . Therefore, the dining table and kitchen recommended for eating here are not suitable for acrylic materials.
Plexiglass products should be cut to the same size, and each angle should be 90°. For multi-color overprinting or four-color printing, porcelain white or transparent organic glass products should be used. Porcelain whiteboard is used for front printing, and transparent board can be printed on both front and back. Good processing performance is not only suitable for mechanical processing but also easy to thermoform. The acrylic sheet can be dyed, and the surface can be painted, silk screened or vacuum coated. 2. Transparency, colorless and transparent plexiglass sheet, with a light transmittance of more than 92%. Excellent weather resistance to nature The environment adaptability is very strong, even if it is exposed to sunlight, wind and rain for a long time, it will not change its performance. It has good anti-aging performance and can be used at ease outdoors.
Acrylic sheets have good processing properties, such as cutting, engraving, drilling, lathe, bending, planing, chamfering and trimming, thermoforming and other processing methods. Below, I will introduce how the acrylic sheet is processed from these processing methods. The machine for cutting acrylic panels generally uses a saw for processing, but unlike wood acrylic cutting, a special cutting saw blade is required. Saw blades that are relatively blunt will have edge chipping and will have a certain resistance to cu