The display box is loved by people for its features such as a variety of colors and changeable shapes. The glue application when pasting the display box is also a technical task. It requires the patience of the operator and the skill; whether the glue is good or not It affects the beauty of the product. If you hit it too little, it will not stick tightly. If you hit it too much, glue will overflow. If you don't press it firmly, bubbles will appear. These problems are not allowed in a qualified display box. The following editor will explain to you the matters needing attention when pasting the display box.
　　 1. The surface of the display box should not have dirt or dust when pasting, otherwise bubbles will appear after pasting. Wipe clean with a dust-free cloth before bonding.
　　 2. The pasted display box cannot be blown with a blower, it should be allowed to air dry naturally, so that the bonding joints can be better fused together.
3. Before the display box is completely melted, avoid direct sunlight for a long time, otherwise it will produce different degrees of yellowing and affect the appearance of the display box.
4. The glue used for acrylic bonding is corrosive. You can use a sticker to protect the parts that don't need to be glued to prevent the overflow of glue from corroding the acrylic surface.
　　5. The domestic acrylic is due to its poor quality, and its surface is rough and uneven and cannot be bonded.
　　 6. Indoor humidity, temperature, etc. will directly affect the bonding of the display box.
　　 The above is the introduction of the details that need to be paid attention to when pasting the display box. The display box is a simple container device used to display goods, which is widely used in supermarkets, shopping malls, exhibition centers and other places. Users who need the display box are welcome to inquire and purchase.